UGOS TECH-FLO (Flotation)

Industrial waste water treatment by pressure flotation method

TO BE APPLIED IN THE FOLLOWING FIELDS

CONTAMINATION REDUCTIONS

– CHEMICAL PRODUCTION

– MEDIUM CONCENTRATION OF SUSPENSION

– STORAGE TANK INTERIOR WASHING

– COD, BOD, FAT, OILS, DETERGENTS

– FOOD PRODUCTION

– HEAVY METALS

– OTHER INDUSTRIAL WASTE WATER

– NEUTRALISED PH

 

PROCESS DESCRIPTION

Waste water from a manufacturing plant is fed to a pump facility, and subsequently fed to a drum sieve. A sieve with 0.5-1.00mm mesh size ensures removal of any large-size impurities from waste water. Subsequently, waste water is collected in a mixed buffer tank, in order to average it in terms of quantity and quality. Such tank may be a concrete tank, to be installed underground (allowing for traffic above / in the green area) or a ground-based PE/PP tank, to be installed in a hall. Such buffer tank is equipped with a mixer and level gauges. Upon reaching set fill level, automation system turns on purification process. Waste water is automatically fed to UGOS TECH-FLO equipment; first, chemical precipitation takes place in pipe flocculator. As a result of dosing coagulants, pH correction agents and flocculants, any contamination is precipitated. Subsequently, waste water is fed to a flotation tank where sediment is being separated from purified waste water through flotation process. The entire process is controlled via control cabinet. The final stage of purification consists of pumping down sediment and subsequent discharge of purified waste water to the sewage system.

UGOS TECH-FLO equipment structure

– high quality framework made of steel and plastic;

– to be constructed in a hall or as a modular structure outdoors (insulated, ventilated, and heated containers);

– pipework made of plastic: PE, PVC.

UGOS TECH-FLO equipment properties

– standard capacity ranging from 1 to 500 L/h (larger capacity upon customer’s request);

– modular structure and low space demand;

– operation technology adjusted for medium- and highly-contaminated waste water;

– optimum pH correction for the process and discharge to the sewage system;

– the lowest possible operational costs, due to automation and selection of chemical agents.

UGOS TECH-FLO equipment controls

– the entire process of waste water purification is controlled;

– fully-automated and visualised system;

– automated pH measurement and correction.

UGOS TECH-FLO offer range

– delivery and furnishing of a pump facility;

– a drum sieve;

– delivery and furnishing of a buffer tank;

– feeding pumps;

– a flocculator and a flotation tank with process chemicals dosing systems;

– automation and control system.

Optionally

– sediment dehydration system;

– GSM communication from a controller, notifying of any event;

– additional chemicals dosage;

Type series

Device type

Capacity

[m3/h]

Waste water tank capacity [m3]

Space

demand [m2]

UGOS TECH-FLO 2

2

10

ca. 25

UGOS TECH-FLO 5

5

20

ca. 30

UGOS TECH-FLO 10

10

50

ca. 60

UGOS TECH-FLO 20

20

100

ca. 90

UGOS TECH-FLO 50

50

200

ca. 150

 

Technological tests and analyses

– to verify correct selection of equipment and process agents.

Załącznik
Wielkość
1.6 MB